PRODUCTS
This product belongs to:
VHF BAND III - DAB
ADE.01.04.22x
ANTENNA FEATURES
- Dipole antenna.
- Vertical polarization.
- Broadband 215÷245 MHz.
- Omnidirectional radiation pattern.
- Hot dip galvanized steel version.
- Analogue/Digital Service.
RADIATION PATTERNS (Mid Band)
ELECTRICAL DATA
| WORKING BAND: | 215-245 MHz |
| BANDWIDTH: | VHF band III |
| GAIN: | 2.2 dBd (4.4 dBi) |
| VSWR: | ≤ 1.2:1 (-20.8 dB) |
| POLARIZATION: | Vertical |
| IMPEDANCE: | 50 Ohm unbalanced |
| HALF POWER BEAMWIDTH: | E-Plane - 81° H-Plane - 201° |
| LIGHTNING PROTECTION: | All metal parts DC grounded including inner conductors |
| AVAILABLE VERSION AND CODE: | ADE0104221- DIN 7/16 female - max 500W rms ADE0104222 - EIA 7/8” - max 1000W rms |
MECHANICAL DATA
| MATERIALS: | Hot dip galvanized steel body, brackets and bolts Aluminium internal line |
| MOUNTING: | Directly on supporting structure |
| MOUNTING BRACKETS: | Included for Ø40÷114mm pipe (Ø1 5/8” - 4”) |
| ICING PROTECTION: | Optional ABS radome (XRADE) |
| TREATMENTS: | Hot dip galvanized body Silver plated connector |
| PRESSURIZATION: | No |
| ANTENNA DIMENSIONS: | 580x570x50 mm (22.8x22.4x1.96 in) |
| WEIGHT: | 6 kg (13.2 lb) |
| WIND SURFACE: | 0.03m2 (0.09 ft2) front - 0.06m2 (0.19 ft2) side |
| WIND LOAD (160 km/h and 30°C) (160 km/h and 30°C) | 0.002 kN front - 0.05 kN side |
| SURVIVAL WIND: | 220 km/h (136.7 mph) |
| PACKING DIMENSIONS: | Box 800x800x200mm - 10kg (31.5x31.5x7.8 in - 22.04lb) |
ARRAY FEATURES
- Omnidirectional patterns
- Equal or unequal power distribution system
- Configurable for specific azimut and elevation pattern
- Suitable for multiplexing many channels
ARRAY ELECTRICAL DATA
| FREQUENCY RANGE | 215 ÷ 245 MHz |
| IMPEDANCE | 50 ohm |
| CONNECTOR | EIA flange according to system power rating |
| POWER RATING | The antenna system can accept any power according to requirements |
| VSWR | ≤ 1.14 in the operating channels or ≤ 1.2 throughout the frequency range Antenna system VSWR value also depending from the supporting structure |
| POLARIZATION | Vertical |
| GAIN | Refer to table |
| HORIZONTAL PATTERN | Omnidirectional |
| VERTICAL PATTERN | Null fill, beam tilt and special requirements to order |
| OTHER FEATURES | Antenna components and feed harnesses can be optimized for channels of interest. |
ARRAY MECHANICAL DATA
| HEIGHT OF ARRAY | Subject to number of bays |
| TOTAL NET WEIGHT | Refer to table |
| WIND LOAD | Refer to table |
| PRESSURIZABLE | No |
| MOUNTING HARDWARE | Optional mounting for side mount configuration |
ARRAY TECHNICAL DATA
ANTENNA DIMENSIONAL DETAILS
ANTENNA DIMENSIONAL DETAILS
OPTIONS & SERVICES
| PATTERN DESIGN | Custom azimuth and elevation (beam tilt and null fill) patterns can be designed to meet specific protection/coverage requirements |
| PATTERN CERTIFICATION | Proof-of-performance factory test and pattern measurements on ALDENA test plan area |
| MOUNTING HARDWARE | Turn-key antenna delivering Tower top/side spine Special hardware/brackets |
| TRANSMISSION LINE | Transmission line system design and layout |
| COMBINERS/FILTERS | Combiners/Filters to suit requirements can be supplied |
| CALCULATION SERVICES | Coverage/interferfence simulations EM Near Field control and reduction (Environmental impact studies) |
| ON-SITE SERVICES | Site Survey and Inspection Installation/commissioning and supervisioning Drive test & EM Field strength measurements After sales maintenance |
| TRAINING | Techical training certification and consultancy |
Specifications are subject to change without notice.