PRODUCTS
This product belongs to:
VHF BAND III - DAB
AVP.02.04.43x
ANTENNA FEATURES
- 2 dipoles antenna panel.
- Horizontal or vertical polarization.
- Broadband 174÷230 MHz.
- Directional radiation pattern.
- Analogue/Digital service.
ELECTRICAL DATA
WORKING BAND: | 174 - 230 MHz |
BANDWIDTH: | VHF band III |
GAIN: | 7.5 dBd (9.7 dBi) circular polarization 7.5 dBd (9.7 dBi) linear polarization |
VSWR: | ≤ 1.12:1 (-25 dB) |
POLARIZATION: | Linear (horizontal or vertical upon request) |
IMPEDANCE: | 50 Ohm unbalanced |
HALF POWER BEAMWIDTH: | E-Plane - 64° H-Plane - 62° |
LIGHTNING PROTECTION: | All metal parts DC grounded including inner conductors |
AVAILABLE VERSION AND CODE: | AVP0204431 - DIN 7/16 female - max 2000W rms AVP0204432 - EIA 7/8” flange - max 3000W rms |
MECHANICAL DATA
MATERIALS: | Reflecting grid in hot dip galvanized steel Dipoles in stainless steel |
MOUNTING: | Directly on supporting structure via Ø11 holes |
MOUNTING BRACKETS: | Optional (cod. XAVP) for ø40-114mm mast |
ICING PROTECTION: | Dipoles covered by ABS radome |
TREATMENTS: | Reflecting grid in hot dip galvanized steel Silver-plated lines and connector |
ANTENNA DIMENSIONS: | 1220x1110x410 mm (48x43.7x16.1 in) |
WEIGHT: | 35 kg (77.16 lb) |
WIND SURFACE: | 0.36 m2 (3.87 ft2) front - 0.17 m2 (1.82 ft2) side |
WIND LOAD (160 km/h and 30°C) (160 km/h and 30°C) | 0.53 kN front - 0.17 kN side |
SURVIVAL WIND: | 220 km/h (136.7 mph) |
PACKING DIMENSIONS: | Wooden cage (ISMP-15) 1350x1250x445 mm - 55 kg gross (20.87x41.34x14.57 in - 34.17 lb) |
ARRAY ELECTRICAL DATA
FREQUENCY RANGE | 174 ÷ 230 MHz |
IMPEDANCE | 50 ohm |
CONNECTOR | EIA flange according to system power rating |
POWER RATING | The antenna system can accept any power according to requirements |
VSWR | ≤ 1.09 in the operating channels or ≤ 1.13 throughout the frequency range Antenna system VSWR value also depending from the supporting structure |
POLARIZATION | Horizontal or vertical |
GAIN | Refer to table |
HORIZONTAL PATTERN | Any type according to requirement |
VERTICAL PATTERN | Null fill, beam tilt and special requirements to order |
OTHER FEATURES | Antenna components and feed harnesses can be optimized for channels of interest. The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power. |
ARRAY MECHANICAL DATA
HEIGHT OF ARRAY | Subject to number of bays |
TOTAL NET WEIGHT | Refer to table |
WIND LOAD | Refer to table |
PRESSURIZABLE | No |
MOUNTING HARDWARE | Optional mounting for side mount configuration |
OPTIONS & SERVICES
PATTERN DESIGN | Custom azimuth and elevation (beam tilt and null fill) patterns can be designed to meet specific protection/coverage requirements |
PATTERN CERTIFICATION | Proof-of-performance factory test and pattern measurements on ALDENA test plan area |
MOUNTING HARDWARE | Turn-key antenna delivering Tower top/side spine Special hardware/brackets |
TRANSMISSION LINE | Transmission line system design and layout |
COMBINERS/FILTERS | Combiners/Filters to suit requirements can be supplied |
CALCULATION SERVICES | Coverage/interferfence simulations EM Near Field control and reduction (Environmental impact studies) |
ON-SITE SERVICES | Site Survey and Inspection Installation/commissioning and supervisioning Drive test & EM Field strength measurements After sales maintenance |
TRAINING | Techical training certification and consultancy |
Specifications are subject to change without notice.