PRODUCTS
This product belongs to:
FM RADIO
VHF BAND II FM
AQP.04.02.42X
ANTENNA FEATURES
- 4 dipoles antenna panel
- Circular, Elliptical, Vertica, Horizontal polarization
- Broadband 87.5÷108 MHz.
- Directional radiation pattern.
- Demountable.
- Hot dip galvanized steel.
RADIATION PATTERNS (Mid Band)
ELECTRICAL DATA
| WORKING BAND: | 87.5 - 108 MHz |
| BANDWIDTH: | VHF band FM |
| GAIN: | 4.6 dBd (6.8 dBi) circular polarization 7.7 dBd (9.9 dBi) linear polarization |
| VSWR: | ≤ 1.13:1 (-24.3 dB) |
| POLARIZATION: | Circular, elliptical, vertical, horizontal |
| IMPEDANCE: | 50 Ohm unbalanced |
| HALF POWER BEAMWIDTH: | Vertical component: E-Plane - 63° - H-Plane - 53° Horizontal component: E-Plane - 68° - H-Plane - 65° |
| LIGHTNING PROTECTION: | All metal parts DC grounded including inner conductors |
| AVAILABLE VERSION AND CODE: | AQP0402420 - 2x EIA 7/8”. - max 4x 4000W rms AQP0402421 - 2x DIN 7/16” - max 4x 3300W rms |
MECHANICAL DATA
| MATERIALS: | Hot dip galvanized steel |
| MOUNTING: | Directly on supporting structure via Ø11 holes |
| MOUNTING BRACKETS: | Optional (cod. XAVP) for ø60-114mm (2.36”- 4+1/2”) mast |
| ICING PROTECTION: | Feed point radome |
| TREATMENTS: | Reflecting grid, dipoles and bolts in hot dip galvanized steel Silver-plated lines and connector |
| ANTENNA DIMENSIONS: | 2200x2200x910 mm (86.6x86.6x35.8 in) |
| ANTENNA WEIGHT: | 85 kg (187.4 lb) |
| WIND SURFACE: | 1.00 m2 (10.7 ft2) front - 0.59 m2 (6.35 ft2) side |
| WIND LOAD (160 km/h and 30°C) (160 km/h and 30°C) | 1.54 kN front - 0.93 kN side |
| SURVIVAL WIND: | 220 km/h (136.7 mph) |
| PACKING DIMENSIONS: | Wooden cage (ISMP-15) 2300x2300x400 mm - 170 kg (90.5x90.5x15.7 in - 374.7 lb) |
ARRAY FEATURES
- Omnidirectional o directional patterns
- Equal or unequal power distribution system
- Configurable for specific azimut and elevation pattern
- Suitable for multiplexing many channels
ARRAY ELECTRICAL DATA
| FREQUENCY RANGE | 87.5 ÷ 108 MHz |
| IMPEDANCE | 50 ohm |
| CONNECTOR | EIA flange according to system power rating |
| POWER RATING | The antenna system can accept any power according to requirements |
| VSWR | ≤ 1.17 in the operating channels or ≤ 1.25 throughout the frequency range Antenna system VSWR value also depending from the supporting structure |
| POLARIZATION | Circular, elliptical, vertical, horizontal |
| GAIN | Refer to table |
| HORIZONTAL PATTERN | Any type according to requirement |
| VERTICAL PATTERN | Null fill, beam tilt and special requirements to order |
| OTHER FEATURES | Antenna components and feed harnesses can be optimized for channels of interest. The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power. |
ARRAY MECHANICAL DATA
| HEIGHT OF ARRAY | Subject to number of bays |
| TOTAL NET WEIGHT | Refer to table |
| WIND LOAD | Refer to table |
| PRESSURIZABLE | No |
| MOUNTING HARDWARE | Optional mounting for side mount configuration |
ARRAY TECHNICAL DATA
ANTENNA DIMENSIONAL DETAILS
ARRAY VERTIVAL HEIGHT
OPTIONS & SERVICES
| PATTERN DESIGN | Custom azimuth and elevation (beam tilt and null fill) patterns can be designed to meet specific protection/coverage requirements |
| PATTERN CERTIFICATION | Proof-of-performance factory test and pattern measurements on ALDENA test plan area |
| MOUNTING HARDWARE | Turn-key antenna delivering Tower top/side spine Special hardware/brackets |
| TRANSMISSION LINE | Transmission line system design and layout |
| COMBINERS/FILTERS | Combiners/Filters to suit requirements can be supplied |
| CALCULATION SERVICES | Coverage/interferfence simulations EM Near Field control and reduction (Environmental impact studies) |
| ON-SITE SERVICES | Site Survey and Inspection Installation/commissioning and supervisioning Drive test & EM Field strength measurements After sales maintenance |
| TRAINING | Techical training certification and consultancy |
Specifications are subject to change without notice.