PRODUCTS
This product belongs to:
FM RADIO
VHF BAND II FM
AVP.02.02.42X
ANTENNA FEATURES
- Double dipole antenna panel
- Vertical or horizontal polarization.
- Broadband 87.5÷108 MHz.
- Directional radiation pattern.
- Hot dip galvanized steel.
ELECTRICAL DATA
WORKING BAND: | 87.5 - 108 MHz |
BANDWIDTH: | VHF band FM |
GAIN: | 7.5 dBd (9.7 dBi) |
VSWR: | ≤ 1.16:1 (-22.6 dB) |
POLARIZATION: | Linear (vertical or horizontal) |
IMPEDANCE: | 50 Ohm unbalanced |
HALF POWER BEAMWIDTH: | E-Plane - 69° H-Plane - 55° |
LIGHTNING PROTECTION: | All metal parts DC grounded including inner conductors |
AVAILABLE VERSION AND CODE: | AVP0202420 - EIA 7/8” - max 5000W rms AVP0202421 - DIN 7/16” fem. - max 3000W rms AVP0202428 - EIA 1+5/8” - max 15000W rms |
MECHANICAL DATA
MATERIALS: | Hot dip galvanized steel (AVP020242X Version) Stainless steel dipoles (AVP0202428 Version) |
MOUNTING: | Directly on supporting structure via Ø11 holes |
MOUNTING BRACKETS: | Optional (cod. XAVP) for ø40-114mm mast (1+1/2” - 4+1/2”) |
ICING PROTECTION: | Feed point radome |
TREATMENTS: | Reflecting grid, dipoles and bolts in hot dip galvanized steel Silver-plated lines and connector |
ANTENNA DIMENSIONS: | 2200x1740x790 mm (86.6x68.5x31.1 in) |
ANTENNA WEIGHT: | 65 kg (143.3 lb) |
WIND SURFACE: | 0.87 m2 (9.36 ft2) front - 0.24 m2 (2.58 ft2) side |
WIND LOAD (160 km/h and 30°C) (160 km/h and 30°C) | 1.41 kN front - 0.27 kN side |
SURVIVAL WIND: | 220 km/h (136.7 mph) |
PACKING DIMENSIONS: | Wooden cage (ISMP-15) 2300x1850x1000 mm - 120 kg (90.5x72.8x39.3 in - 264.5 lb) |
ARRAY ELECTRICAL DATA
FREQUENCY RANGE | 87.5 ÷ 108 MHz |
IMPEDANCE | 50 ohm |
CONNECTOR | EIA flange according to system power rating |
POWER RATING | The antenna system can accept any power according to requirements |
VSWR | ≤ 1.17 in the operating channels or ≤ 1.25 throughout the frequency range Antenna system VSWR value also depending from the supporting structure |
POLARIZATION | Linear (Vertical or horizontal) |
GAIN | Refer to table |
HORIZONTAL PATTERN | Any type according to requirement |
VERTICAL PATTERN | Null fill, beam tilt and special requirements to order |
OTHER FEATURES | Antenna components and feed harnesses can be optimized for channels of interest. The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power. |
ARRAY MECHANICAL DATA
HEIGHT OF ARRAY | Subject to number of bays |
TOTAL NET WEIGHT | Refer to table |
WIND LOAD | Refer to table |
PRESSURIZABLE | No |
MOUNTING HARDWARE | Optional mounting for side mount configuration |
OPTIONS & SERVICES
PATTERN DESIGN | Custom azimuth and elevation (beam tilt and null fill) patterns can be designed to meet specific protection/coverage requirements |
PATTERN CERTIFICATION | Proof-of-performance factory test and pattern measurements on ALDENA test plan area |
MOUNTING HARDWARE | Turn-key antenna delivering Tower top/side spine Special hardware/brackets |
TRANSMISSION LINE | Transmission line system design and layout |
COMBINERS/FILTERS | Combiners/Filters to suit requirements can be supplied |
CALCULATION SERVICES | Coverage/interferfence simulations EM Near Field control and reduction (Environmental impact studies) |
ON-SITE SERVICES | Site Survey and Inspection Installation/commissioning and supervisioning Drive test & EM Field strength measurements After sales maintenance |
TRAINING | Techical training certification and consultancy |
Specifications are subject to change without notice.